Pass Guaranteed Perfect Juniper - JN0-351 Exam Labs

Wiki Article

P.S. Free 2026 Juniper JN0-351 dumps are available on Google Drive shared by ExamDumpsVCE: https://drive.google.com/open?id=1VheYUPERxS1Rx8to7HQ2v1o8PI1q5_Fl

Moreover, you do not need an active internet connection to utilize ExamDumpsVCE Juniper JN0-351 practice exam software. It works without the internet after software installation on Windows computers. The ExamDumpsVCE web-based Juniper JN0-351 Practice Test requires an active internet and it is compatible with all operating systems. You can conveniently test your performance by checking your score each time you use our Juniper JN0-351 practice exam software.

Juniper JN0-351 Exam Syllabus Topics:

TopicDetails
Topic 1
  • BGP: This topic focuses on the operational and conceptual elements of BGP, a cornerstone in enterprise networks.
Topic 2
  • IS-IS: Aspiring Juniper networking professionals enhance their understanding of IS-IS routing protocols. This topic equips candidates with the knowledge to configure and monitor IS-IS systems, addressing specific exam challenges and practical applications.
Topic 3
  • Layer 2 Security: This topic introduces Layer 2 protection mechanisms and firewall filters to fortify network security. Practical skills in configuring, monitoring, and troubleshooting these features prepare candidates to address exam objectives and real-world challenges effectively.
Topic 4
  • Protocol Independent Routing: An essential domain for understanding routing components outside protocol dependencies, this topic enhances expertise in configuring, monitoring, and troubleshooting critical elements.
Topic 5
  • Spanning Tree: Networking professionals explore the principles and advantages of the Spanning Tree Protocol (STP) to ensure loop-free topologies in Layer 2 networks.
Topic 6
  • OSPF: The concepts and operational details of OSPF are explored, providing tools for routing efficiency. Configuration and troubleshooting mastery ensure readiness for both the exam and complex enterprise environments.

>> JN0-351 Exam Labs <<

Quiz JN0-351 - Trustable Enterprise Routing and Switching, Specialist (JNCIS-ENT) Exam Labs

Whether for a student or an office worker, obtaining JN0-351 certificate can greatly enhance the individual's competitiveness in the future career. Try our JN0-351 study materials, which are revised by hundreds of experts according to the changes in the syllabus and the latest developments in theory and practice. Once you choose JN0-351 training dumps, passing the exam one time is no longer a dream.

Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) Sample Questions (Q27-Q32):

NEW QUESTION # 27
Exhibit.

What is the management IP address of the device shown in the exhibit?

Answer: A

Explanation:
Explanation
The management IP address of a device is the IP address that is used to access the device for configuration and monitoring purposes. It is usually assigned to a dedicatedmanagement interface that is separate from the data interfaces. The management interface can be accessed via SSH, Telnet, HTTP, or other protocols.
In the exhibit, the list of interfaces and their statuses shows that the management interface isme0. This interface has an admin status ofup, a protocol status ofinet, a local address of172.23.12.100/24, and a remote address ofunspecified. This means that the me0 interface is active, has an IPv4 address assigned, and is not connected to another device.
Therefore, the management IP address of the device shown in the exhibit is172.23.12.100.
References:
[Management Interfaces Overview] : [Displaying Interface Status Information]


NEW QUESTION # 28
You want to ensure traffic is routed through a GRE tunnel.
In this scenario, which two statements will satisfy this requirement? (Choose two.)

Answer: A,D

Explanation:
Explanation
Option A is correct. For traffic to be sent through a GRE tunnel, there must be a route that directs the traffic into the tunnel. This is typically accomplished through the use of a static route or a dynamic routing protocol.
Option B is correct. All intermediary devices must have a route to the tunnel endpoints34. In real-world scenarios, the tunnel endpoints for a tunnel going over the Internet must have globally reachable internet addresses. Otherwise, intermediate routers in the Internet cannot forward the tunneled packets.


NEW QUESTION # 29
You are asked to create a new firewall filter to evaluate Layer 3 traffic that is being sent between VLANs. In this scenario, which two statements are correct? (Choose two.)

Answer: A,B

Explanation:
A firewall filter is a configuration that defines the rules that determine whether to forward or discard packets at specific processing points in the packet flow. A firewall filter can also modify the attributes of the packets, such as priority, marking, or logging. A firewall filter can be applied to various interfaces, protocols, or routing instances on a Juniper device. A firewall filter has a family attribute, which specifies the type of traffic that the filter can evaluate. The family attribute can be one of the following: inet, inet6, mpls, vpls, iso, or ethernet- switching. The family inet firewall filter is used to evaluate IPv4 traffic, which is the most common type of Layer 3 traffic on a network.
To create a family inet firewall filter, you need to specify the appropriate match criteria and actions for each term in the filter. The match criteria can include various fields in the IPv4 header, such as source address, destination address, protocol, port number, or DSCP value. The actions can include accept, discard, reject, count, log, policer, or next term. To apply a firewall filter to Layer 3 traffic that is being sent between VLANs, you need to apply the filter to the appropriate IRB interface. An IRB interface is an integrated routing and bridging interface that provides Layer
3 functionality for a VLAN on a Juniper device. An IRB interface has an IP address that acts as the default gateway for the hosts in the VLAN. An IRB interface can also participate in routing protocols and forward packets to other VLANs or networks.
Therefore, option C is correct, because you should create a family inet firewall filter with the appropriate match criteria and actions. Option D is correct, because you should apply the firewall filter to the appropriate IRB interface


NEW QUESTION # 30
Which statement is correct about the storm control feature?

Answer: D

Explanation:
Option A is correct. The storm control feature is enabled in the factory-default configuration on EX Series switches12. On EX2200, EX3200, EX3300, EX4200, and EX6200 switches, the factory default configuration enables storm control for broadcast and unknown unicast traffic on all switch interfaces2. On EX4300 switches, the factory default configuration enables storm control on all Layer 2 switch interfaces1.
Option B is incorrect. The storm control feature does not require a special license on EX Series switches34.
Option C is incorrect. There's no information available that suggests the storm control feature is not supported on aggregate Ethernet interfaces.
Option D is incorrect. The storm control configuration applies to traffic at the ingress of an interface5, not just between the forwarding and control plane.


NEW QUESTION # 31
Exhibit

Your BGP neighbors, one in the USA and one in France, are not establishing a connection with each other.
Referring to the exhibit, which statement is correct?

Answer: A

Explanation:
Explanation
The exhibit shows the configuration of BFD liveness detection for BGP at the global level, which applies to all BGP neighbors by default1. However, this configuration does not specify the session mode, which determines whether BFD uses single-hop or multihop mode to communicate with a neighbor2.
For single-hop BGP neighbors, which are directly connected on the same subnet, the session mode can be either automatic or single-hop. For multihop BGPneighbors, which are not directly connected and require multiple hops to reach, the session mode must be multihop2.
Since your BGP neighbors are in different countries, they are likely to be multihop neighbors. Therefore, you need to configure the session mode as multihop for each neighbor individually at the [edit protocols bgp group group-name neighbor address bfd-liveness-detection] hierarchy level2. For example:
protocols { bgp { group usa { neighbor 192.0.2.1 { bfd-liveness-detection { session-mode multihop; } } } group france { neighbor 198.51.100.1 { bfd-liveness-detection { session-mode multihop; } } } } } If you do not configure the session mode for multihop neighbors, BFD will use the default mode of automatic, which will try to use single-hop mode and fail to establish a BFD session with the remote neighbor2. This will prevent BGP from using BFD to detect liveliness and failover.
Therefore, the answer B is correct, as you need to configure the BFD liveness detection on the BGP neighbor level with the appropriate session mode for multihop neighbors.


NEW QUESTION # 32
......

The Juniper JN0-351 certification topics or syllabus are updated with the passage of time. To pass the Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) exam you have to know these topics. The ExamDumpsVCE JN0-351 certification exam trainers always work on these topics and add their appropriate Juniper JN0-351 Exam Questions And Answers in the JN0-351 exam dumps. These latest Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) exam topics are added in all Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) exam questions formats.

JN0-351 Real Dump: https://www.examdumpsvce.com/JN0-351-valid-exam-dumps.html

BTW, DOWNLOAD part of ExamDumpsVCE JN0-351 dumps from Cloud Storage: https://drive.google.com/open?id=1VheYUPERxS1Rx8to7HQ2v1o8PI1q5_Fl

Report this wiki page